The IntegriScan is the most advanced & reliable (ELD) Electronic Leak Detection testing method available

Flood testing can not pinpoint a breach location

COMPARE INTEGRISCAN™ FLOOD TESTING
METHOD

New Dual-Sensor Cross Scan Technology (Proprietary)

Gravity – water is temporarily dammed over a horizontal surface to determine the effectiveness of the waterproofing. Visual inspection for moisture intrusion.

TESTING DEVICE

IntegriScan utilizes a mobile platform that isolates a smaller test area for better conductance and more reliable readings

All downspouts are blocked, water sits on the roof for 24-48 hours. Visual inspection for moisture intrusion.

COVERAGE

100% of horizontal and vertical surfaces

Flooded surfaces only

TEST INVERTED ASSEMBLIES

YES

Will indicate (but not find) only obvious leaks, will not pinpoint breaches. Hydrostatic pressure is a factor.

TEST CONVENTIONAL ASSEMBLIES

YES, with TruGround installed directly below the membrane

Flood testing of a conventional roof is typically not possible due to structural stress.

TEST EPDM YES – ONLY Detec Systems can test black EPDM and semi conductive waterproofings. NO – Flood testing is not recommended due to structural stress.
TEST VERTICAL SURFACES YES – Detec’s Vertical Scan Unit (VSU) is a belt mounted roller apparatus that will detect breaches in verticals. NO
TEST TIME Typically 5,000 sq ft/hr 1 day to construct dams and 24-48 hours to test
ACCURACY

Pinpoints locations of water ingress

Extrapolation from location of interior leak

RCABC ROOFING GUARANTEE PROGRAM APPROVED NOT APPROVED
IT'S A GAME CHANGER!
A new patented formulation that enables what was, until now, not possible: 
A truly reliable membrane integrity test for conventional membrane assemblies!

TruGround is the only approved/conclusive method to perform membrane integrity testing on conventional roofs. Stop playing games with other testing methods. Spec the one that works. Fast. Affordable. Reliable. Who says you can't have it all?